-
SU190
Double Pole Single Throw$178.00Features
- SPDT UL recognized DC contactor
- Rated 250A for Load Switching
- Rate 350A for Carrying Current
-
DC88
100A, Monoblock Motor Reversing DC Contactor$185.00Features
- Monoblock Motor Reversing DC Contactor
- Modern Version of the SW88
- UL Recognized for 100A in Electric Vehicles
-
SW88
100-125A, Paired SPDT DC Contactor for Motor Reversing$185.00Features
- Pair SPDT DC Contactor for Motor Reversing
- UL Recognized for Electric Vehicles (100A)
- UL Recognized for Power Systems (125A)
-
SU280P
250A, SPST, NO, Protected DC Contactor$185.00Features
- Heavy Duty 250A DC Contactor
- Protected Enclosure
- Great for Marine Environments
- Stud Mount Contacts
-
DC92P
100A, 2 SPST, NO, DC Contactors in a Protected Monoblock Pkg$188.00Features
- Replaces SW92P
- 2 SPST, NO DC Contactors
- Monoblock Construction
- Environmentally Protected Package
- UL recognized for 100A in Electric Vehicles
-
SW210
Single Pole Single Throw, Normally Closed$206.75 As low as: $203.25Features
- Normally Closed, SPST
- 250A Continuous Duty for Inductive Loads
- 400A Continuous Duty for Resistive Loads
- UL Recognized
-
SW121
Double Pole changeover$205.00 -
SW822P
100 or 125A, NO, Environmentally Protected DC Contactor for Motor Reversing$206.25Features
- Environmentally Protected
- Motor Reversing Contactor
- Paired DPST, NO DC Contactors
- UL Recognized for Electric Vehicles (100A)
- UL Recognized for Power Systems (125A)
-
DC88P-1000
100A, Monoblock Motor Reversing, Protected DC contactor with Integral Bracket$215.00Features
- Monoblock Motor Reversing DC Contactor
- Protected Water Resistant Case: IP66
- Ideal for Marine Environments
- Integral Bracket
- Modern Version of the SW88 Model
-
SW560
600A, 60VDC, SPST, N.O., Meant for Low Frequency Switching$220.00Features
- SPST Busbar Configuration
- Lower Cost than SW600
- 600A Continuous Duty
- UL recognized for Power Distribution Systems
-
SW200
250A or 400A, Single Pole Single Throw, Normally Open$225.00 As low as: $221.50Features
- SPST DC Contactor
- UL Recognized
- Rated 400A for Resistive Loads
- Rated 250A for Inductive Loads
-
SW201
250A or 400A, Single Pole Double Throw, Changeover$235.00 As low as: $231.50Features
- SPDT DC Contactor
- UL Recognized
- Rated for 400A Resistive Loads
- Rated for 250A Inductive Loads
-
DC88P
100A, Monoblock Motor Reversing, Protected DC contactor$235.00Features
- Monoblock Motor Reversing DC Contactor
- Protected Water Resistant Case
- Modern Version of the SW88 Model
-
SW192
Paired SW190 for Motor Reversing$288.70UL recognized DC contactor for both use in battery powered vehicles and power distribution systems. This contactor is rated 200A for resistive loads (e.g. Power System) and 150A for inductive/capacitive loads (e.g. electric motors). Learn More -
DC182P
Albright DC182P Protected Motor Reversing Contactor$295.00Features
- Environmentally Protected
- Motor Reversing DC Contactor
- Updated Version of the DC182 in Protective Cover
- UL Recognized for 150A in Electric Vehicles
-
SW204
Two SW200 on a Double Bracket$336.00 As low as: $332.50Features
- Two SPST SW200 DC Contactors on a Bracket
- UL Recognized
- Rated for 250A each for Inductive Loads
- Rated for 400A each for Resistive Loads
-
SW182
Motor Reversing DC Contactor$337.45Features
- 150 or 200A Continuous Duty Rating
- Motor Reversing DC Contactor
- UL Recognized for Electric Vehicles (150A)
- UL Recognized for Power Systems (200A)
-
SW189
Pair of Normally Closed SPST DC Contactors on a Double Bracket$342.50Features
- 150 or 200A Continuous Duty Rating
- Pair of Normall Closed SPST DC Contactors on a Single Bracket
- UL Recognized for Electric Vehicles (150A)
- UL Recognized for Power Systems (200A)
-
ED402
400 Amp, DPST, Manual Disconnect Switch$347.00Features
- Rapid Manual Disconnect
- Ideal for Power Distribution Systems
- Safely Break Full Load
-
SW600
600A, 60VDC, SPST, N.O., Meant for Higher Frequency Switching$349.50Features
- SPST Busbar Configuration
- 600A Continuous Duty
- UL recognized for Power Distribution Systems